Quadralite Move X is a small, compact and light – but above all – easy to use and reliable. This strobe offers every beginner an easy way to learn studio photography and it's basic techniques without high expenses. However Move X will be an efficient tool in hands of professionals. Thanks to compact housing it’s easy to carry around and hassle-free in storage. Integrated Navigator X wireless system make’s it even more useful both in studio or on-location.



Fast and accurate

Move X stands out for it’s wide power output adjustment range of 5 f-stops (1/1 – 1/32) adjustable in 1/10th-stop which is quite unique in this price range. Beside this high level of precision, Move X is also rather fast and can recycle in less than 1,7s even when maximum power output is used. It can also reach very short flash duration of 1/2000s @1/32 of power (t=0.1). Color temperature shift between each flash at given power output level should not be larger than ±200K.


Wireless control

Move X strobes are equipped with built-in Navigator X wireless system receiver. This feature allows full wireless control and triggering up to 100m. Move X can be controlled by other flashes (for example: Stroboss 60 or Stroboss 36 speedlites), or by Navigator X and X2 radio controllers up to cameras x-sync speed in manual mode (TTL is not supporter). Move X is also equipped with USB port where Navigator Kit receivers can be attached and flash can be used in the same setup with older Quantuum and Quadralite flashes. There is also sync port with 3,5mm Jack socket for third party triggers.


Easy to use

Rear panel is equipped with large backlite LCD screen featuring high visibility at almost any angle. All flash status information are presented there for user convenience even in bright ambient light. Flash power output can be adjusted by knob located on the right side of LCD. There is also a set of five buttons delivering easy access to all flash features and functions such as wireless modes, sound signal, etc. Modeling light can be used in manual mode or linked to adjusted flash power level.


Light and compact

Quadralite Move X is exceptionally light (approx. 2kg depending on version) and packed into a small housing made of aluminum alloy. Stand bracket is also made of metal providing up/down shift adjustment and can hold quite large light modifiers (softboxes up to 120cm in diameter).



Move X flash is equipped with Bowens S-mount and can be used with large variety of light modifiers supplied by Quadralite or other manufacturers. You can modify the light according to your needs thanks to a wide assortment of sofboxes, reflectors, beauty-dishes, snoots, umbrellas etc.


Move X 200


Move X 300


Move X 400




  • Available in three power variants: 200, 300 and 400Ws
  • Flexible and accurate flash power adjustment within the range of 5 f-stops (5EV) in 50 steps (1/1 – 1/32) every 0.1 EV
  • Short flash duration of 1/2000s (t0.1, at 1/32 of power)
  • Colour temperature consistency through the entire output range (5600K±200K)
  • Short recycling times (1.5s at full power)
  • Integrated Quadralite Navigator X receiver for wireless control and triggering1
  • Optical slave triggering and standard sync socket (Jack 6.3mm) for flash synchronization
  • Automatic power reduction while decreasing flash output
  • 150W halogen modeling light can be used in a proportional or manual mode
  • Active cooling (integrated fan)
  • Compatible with the Bowens type mount light modifiers
  • Light and compact housing



Model Move X 200 Move X 300 Move X 400
Product type Studio flash
Max energy output 200Ws 300Ws 400Ws
Guide Number1 (@1/1, ISO100, 7' stndard reflector) 49m 58m 65m
Color Temperature 5600K±200K
Energy range 1/32 (6,2Ws) ~ 1/1 (200Ws) 1/32 (9,3Ws) ~ 1/1 (300Ws) 1/32 (12,5Ws) ~ 1/1 (400Ws)
Recycle time ~0,3 – 1,5s
Flash Modes M
High Speed Sync No
Flash Duration (t=0.1) 1/800s @1/11/2000s @1/32
Stroboscopic Flash (Multi) No
Type Halogen
Max power 150W
Color Temperature approx. 3300K
Modes manual/proportional/OFF
Navigator X Yes (built-in receiver)
Modes Slave/OFF
Channels 32
Groups 16
Power source AC220V–240V ~50Hz
Sync socket Yes (3.5mm Jack)
Slave cell Yes
Cooling Active (fan+heat-sink)
Firmware upgrade No
Ready indicator Visual and sound signal
Display Dot-matrix hi-contrast LCD
Operating temperature range +10ºC ~ +40ºC
Diameter x Height x Width 11,4 x 21,9 x 34cm
Weight 2.0kg 2.05kg 2.1kg



For information about Quadralite warranty and service please visit: Warranty.

If you have any questions about our product or warranty please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it..

X Our website uses cookies for making it more user friendly. Staying on the website without changing the browser setings means accepting cookies.