Atlas 600 TTL is a first Quadralite studio flash that synchronizes with a camera through the TTL* mode of automatic flash light metering. This enables users to shoot scenes despite dynamically altering lighting conditions, both in studio and in open fields. The maximum flash output amounts to 600Ws, and can be easily adjusted within 8 aperture values (1/1 – 1/256), allowing to match the flash output to a given theme. The flash is power supplied from the battery and does not require electrical connection, which increases the device’s versatility when shooting outside a photo studio. An option to synchro flashes with fast shutter speeds allows the use of wide apertures and shallow depths of field, also at strong ambient lighting.

 

Pictures of Atlas 600 TTL

ProductProductProductProductProductProduct

 

Atlas 600 TTL comes with an integrated wireless receiver - Quadralite Navigator X, and does not need to be connected to any additional radio receivers. It is also possible to connect the flash to another wireless triggers via Jack 3.5mm connection. Atlas 600 TTL is also fitted with a socket intended for Quadralite Navigator receivers.

Atlas 600 TTL flash may be used with Atlas FH600 flash head which generates 600Ws output. When the head and a light modifier are mounted on a high tripod, a camera body remains within a hand's reach. If the shooting scenario requires a flash with higher output than 600Ws, you can connect two Atlas 600 TTL flashes onto Atlas FH1200 head to receive 1200Ws flash output.

The flash is powered by Li-Ion Atlas PowerPack battery with impressive capacity of 8700mAh. Fully charged battery fires up to 500 full-power flashes. The unit can be replaced to ensure trouble-free operation without power source at hand. The battery is charged through the supplied wall charger and the charging time lasts approximately 4 hours.

 

 

With the Bowens-type mount for accessories the flash can be used with a wide variety of light modifiers, including: reflectors, softboxes and umbrellas, whereas the tripod mount (compatible with almost all studio tripods) allows to adjust the flash's tilt angle.

Quadralite Atlas 600 TTL flash works best with Quadralite Navigator X radio transceiver which allows wireless control and triggering including High-Speed Sync and Multi modes*.

QuadraliteTV

 

Features

  • Compatible with TTL flash metering system of various brands (Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic and Pentax) including high-speed sync (up to 1/80000s)1
  • Maximum flash output of up to 600 WS.
  • Flexible flash output adjustment within 8 aperture values: 25 steps (from 1/1 to 1/256) regulated at 1/3 stop increments of the EV.
  • Power supply ensured by 8700mAh battery allowing for up to 500 full-power flashes.
  • Short flash duration 1/10000 s (t0.1, at 1/256 power).
  • Stable flash color temperature (5600K±200K).
  • Integrated Quadralite Navigator X receiver and the connection for the Navigator receiver.
  • Stroboscopic flash function and synchro with short exposure times*.
  • An option to trigger the flash through a synchro socket of 3.5mm type and photocell.
  • LED light modelling at 10W power.
  • Active cooling (integrated fan).
  • An option to work with Atlas FH600 and Atlas FH1200 flash heads.
  • Equipped with the Bowens type mount for accessories.

 

Specification

Wireless Control

Model

Quadralite Atlas 600 TTL

Product Type

Battery operated studio TTL flash

Compatible Systems

Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic, Pentax1

Maximum Flash Output

600Ws

Guide Number (ISO100, 7” reflector, maximum power)

87m

Flash Mode

TTL/M/Multi

Flash Output Adjustment Range

8 EV at 1/3 step increments

1/1 ~ 1/256 (600 ~ 2.5Ws)

Charging Time

approx. 0.01 ~ 2.5s

Color Temperature of the Flash Light

5600K ± 200K

Flash Time t0.1

1/220 at full power

1/10000s at minimum power

Flash Synchro

Synchro with high shutter speeds (HSS) up to 1/8000s1

Stroboscopic Flash (Multi)

up to 100 flashes, 100Hz

Flash Exposure Correction (FEC)

manual, FEB: ±3 EV at 1/3 increments

Flash Delay

0.01~30 seconds

Flash Triggering

wireless triggering, photocell, Jack 3.5mm connection

Pilot Light

LED

Wireless Control

Optical (Master flash control)

Wireless (with Navigator X receiver)

Wireless Control Mode

Slave, Off

Groups

Optical - 3 (A, B, C)

Wireless - 5 (A, B, C, D, E)

Shooting range

Optical - in enclosed spaces: 12 – 15m / in open spaces: 8 - 10m

Radio - 80m

Channels

Optical - 4

Radio - 32

Cooling

Active (ventilator)

Power Supply

Atlas PowerPack (11.1V/8700mAh) Battery

Battery Efficiency

approx. 500 flashes at full power

Connections

Jack 3.5mm, Mini USB, Navigator port

Dimensions (with the battery)

220x245x125mm (without the reflector and the burner)

Weight (with the battery)

2.69kg (without the reflector and the burner)

 

Warranty

For information about Quadralite warranty and service please visit: Warranty.

If you have any questions about our product or warranty please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it..

 

Footnotes

1 It is required to use a proper Quadralite Navigator X controller to ensure full compatibility with a given camera model. Third party radio triggers will work only up to cameras x-sync speed, wireless output control and HSS is not supported. Detailed information has been provided in the flash manual.