Navigator X2 trigger is the ultimate controller for all Quadralite X wireless system devices. Thanks to it’s large backlit dot matrix LCD screen the User can control up to 5 flash groups simultaneously including its zoom function, flash exposure compensation and modeling light status. Device is equipped with set of five direct action buttons to make work with multiple light set-up easy, fast and comfortable. Ergonomically located control dial ensures precise control over flash power output and other major functions. Built in AF assist light* supports camera's auto-focus adjustment that can be compromised in poor lighting conditions.
Navigator X2 is fully compatible with automatic TTL flash light metering system** and can be used with all Quadralite TTL-capable flashes. Furthermore it can control lights in manual mode (M) and Multi (stroboscopic) modes as well. User can set flash exposure compensation or adjust flash energy output manually. High-Speed Sync and Second Curtain Sync is also supported***. Device is equipped with USB Type-C port for firmware updates and run on two AA batteries for convenience.
Features
- Available in six variants: Canon, Nikon, Sony, Fujifilm, Micro 4/3 (Olympus, Panasonic) and Pentax cameras**
- Ultimate radio controller for all Quadralite X wireless system devices
- Compatible with automatic TTL flash light metering system**
- 2.4 GHz wireless transmission ensures stable work on longer distances both in studio and on location (up to 100m)
- 32 communication channels and 16 groups for fast configuration and control over many lights
- TCM function ensure fast conversion of TTL settings to Manual values for exposure accuracy
- AF assist* helps to adjust focus distance in poor light conditions
- Large backlit LCD screen can display 5 groups settings simultaneously
- HSS (High Speed Sync) up to 1/8000*
- Firmware update is possible through built-in USB-C Type port
* This function is available only for cameras that supports this feature. Please refer to the instruction manual for more info.
** Transmitter variant must me properly matched with specific camera brand for full compatibility. Canon transmitter will not work with Nikon camera and vice-versa.
*** TTL and HSS functions will work only when Navigator X2 is connected with TTL and HSS-capable flash such as: Atlas 600, Reporter 360 TTL or Stroboss 60evo.
Specification
| Model | Quadralite Navigator X2 C | Quadralite Navigator X2 N | Quadralite Navigator X2 S | Quadralite Navigator X2 F | Quadralite Navigator X2 MFT | Quadralite Navigator X2 P |
| Product type | TTL&HSS-capable radio trigger | |||||
| Compatible with | Canon EOS | Nikon | Sony (Multi Interface Shoe) |
Fujifilm X | Micro 4/3 (Olympus, Panasonic) |
Pentax |
| Flash Modes | TTL/M/Multi/OFF** | |||||
| High Speed Sync | up to 1/8000 s** | |||||
| Range | 100 m | |||||
| Frequency | 2.4 GHz | |||||
| Mode | Master | |||||
| Channels | 32 | |||||
| Groups | 16 | |||||
| Power source | 2 x AA | |||||
| Sync socket | 2.5mm Jack | |||||
| Firmware upgrade | Yes (via USB-C Port) | |||||
| Ready indicator | Visual | |||||
| Display | Dot-matrix hi-contrast LCD | |||||
| Operating temperature range | +10ºC to +40ºC | |||||
| Length x Height x Width | 90 x 58 x 50 mm | |||||
| Weight | 80 g (battery not included) | |||||
Compatible cameras
Navigator X2 can be used with the units listed in the table below. These cameras have been checked for full compatibility and should work properly with Quadralite lamps.
| Transmitter: | Compatible camera models: |
| X2 C |
1DX MkII, 1DX, 5DS/5DS R, 5D MkIV, 5D MkIII, 5DMk II, 5D, 7D MkII, 7D, 6D Mk II, 6D 80D, 70D, 60D, 50D, 40D, 30D, 700D, 650D, 600D, 550D, 500D, 450D, 1200D, 1100D, 1100D M5, M3 |
| X2 N |
D5, D4, D810, D800, D750, D700, D610, D500 D300S, D300, D200, D100, D90, D7100, D7000, D70S D60, D3100, D3200, D3300, D5000, D5100, D5200, D5300 |
| X2 S |
SLT-A99, SLT-A99II, SLT-A77II, SLT-A68, SLT-A58 ILCE-A9, ILCE-A7RIII, ILCE-A7RII, ILCE-A7R, ILCE-A7III, ILCE-A7II, ILCE-A7 NEX-6, ILCE-6500, ILCE-6400, ILCE-6300, ILCE-6000 DSC-RX10 |
| X2 F |
A: GFX50S, X-Pro2, X-T20 , X-T2 , X-T1 B: X-Pro1 , X-T10 , X-E1 , X-A3 C: X100F, X100T |
| X2 MFT |
Olympus: OM-D E-M1, OM-D E-M5, OM-D E-M5 II, OM-D E-M10, OM-D E-M10II, PEN-F, E-P3. E-P5, E-PL5, E-PL6, E-PL7, E-PL8 Panasonic: DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK |
| X2 P | K-1, 645Z, K70M K50, KP, K-S2, K-3II |
Navigator X2 should also work properly with other cameras that are not listed in the table above. If a particular model is not included in the list, you should make your own tests before purchasing the Navigator X2.
In the case of the Fujifilm system, depending on the degree of compatibility, the cameras have been divided into three groups and their functionality is described in the table below:
|
Camera group |
TTL |
M |
Multi |
Autofocus support |
||||
|
First curtain |
Second curtain |
HSS (FP) |
First curtain |
Second curtain |
HSS (FP) |
|||
|
A |
OK |
OK |
OK |
OK |
OK |
OK |
OK |
OK |
|
B |
OK |
- |
- |
OK |
- |
- |
OK |
- |
|
C |
OK |
- |
- |
OK |
OK |
- |
OK |
- |
* This function is available only for cameras that supports this feature. Please refer to the instruction manual for more info.
** Transmitter variant must me properly matched with specific camera brand for full compatibility. Canon transmitter will not work with Nikon camera and vice-versa.
*** TTL and HSS functions will work only when Navigator X2 is connected with TTL and HSS-capable flash such as: Atlas 600, Reporter 360 TTL or Stroboss 60evo.
Warranty
For information about Quadralite warranty and service please visit: Warranty.
If you have any questions about our product or warranty please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it..