A complete two-light flash kit that is composed for photographers who want to start their studio photography adventure. Move X 200 Kit features two 200Ws flashes, two 200cm studio stands, silver umbrella and umbrella softbox.

Gallery

This two-light setup is made to be used as a basic studio kit for portrait photography. Thanks to included 60x90cm softbox you can achieve very soft and smooth light which is so desired in portraits. Move X 300 Kit also features two 200cm studio stands and silver umbrella.

Fast and accurate

Move X stands out for it’s wide power output adjustment range of 5 f-stops (1/1 – 1/32) adjustable in 1/10th-stop which is quite unique in this price range. Beside this high level of precision, Move X is also rather fast and can recycle in less than 1,7s even when maximum power output is used. It can also reach very short flash duration of 1/2000s @1/32 of power (t=0.1). Color temperature shift between each flash at given power output level should not be larger than ±200K

Wireless control

Move X strobes are equipped with built-in Navigator X wireless system receiver. This feature allows full wireless control and triggering up to 100m. Move X can be controlled by other flashes (for example: Stroboss 60 or Stroboss 36 speedlites), or by Navigator X and X2 radio controllers up to cameras x-sync speed in manual mode (TTL is not supporter). Move X is also equipped with USB port where Navigator Kit receivers can be attached and flash can be used in the same setup with older Quantuum and Quadralite flashes. There is also sync port with 3,5mm Jack socket for third party triggers.

Easy to use

Rear panel is equipped with large backlite LCD screen featuring high visibility at almost any angle. All flash status information are presented there for user convenience even in bright ambient light. Flash power output can be adjusted by knob located on the right side of LCD. There is also a set of five buttons delivering easy access to all flash features and functions such as wireless modes, sound signal, etc. Modeling light can be used in manual mode or linked to adjusted flash power level.

Light and compact

Quadralite Move X is exceptionally light (approx. 2kg depending on version) and packed into a small housing made of aluminum alloy. Stand bracket is also made of metal providing up/down shift adjustment and can hold quite large light modifiers (softboxes up to 120cm in diameter).

Versatile

Move X flash is equipped with Bowens S-mount and can be used with large variety of light modifiers supplied by Quadralite or other manufacturers. You can modify the light according to your needs thanks to a wide assortment of sofboxes, reflectors, beauty-dishes, snoots, umbrellas etc.

Kit includes

• 2x Quadralite Move X 300,
• 2x 200cm Studio Stand,
• 1x Silver umbrella,
• 1x Softbox 60 x 90cm,
• 1x 18 cm Reflector.

Features

• Flexible and accurate flash power adjustment within the range of 5 f-stops (5EV) in 50 steps (1/1 – 1/32) every 0.1 EV,
• Short flash duration of 1/2000s (t0.5, at 1/32 of power),
• Colour temperature consistency through the entire output range (5600K±200K),
• Short recycling times (1.5s at full power),
• Integrated Quadralite Navigator X receiver for wireless control andtriggering*,
• Optical slave triggering and standard sync socket (Jack 6.3mm) for flash synchronization,
• Automatic power reduction while decreasing flash output,
• 150W halogen modeling light can be used in a proportional or manual mode,
• Active cooling (integrated fan),
• Compatible with the Bowens type mount light modifiers.

*it is required to use Quadralite Navigator X system compatible transmitter. Detailed information has been provided in the flash manual

Specification

Warranty